The second method is called "budding". In this method, when a colony becomes sufficiently large, or a portion of a colony becomes separated from the main colony, new secondary reproductives are formed from larvae or nymphs and the nucleus of a new colony is established.
The primary female reproductive (the queen), is very rarely found in Ontario, whereas secondary reproductives in the colony carry on extensive reproduction.
Some people think that termite identification is difficult but if you know what you are doing it is can be done easily. Termites live in large family units with between several hundred and several million family members. They work together in an organized system to find food sources.
Powder post beetles only do significant damage when multiple generations continually re-infest the same piece of wood. Also, powder post beetle damage is restricted to hardwoods, and since most structural framing is made of softwood lumber it is rarely attacked by these insects.
The subterranean termite is very closely associated with the soil, which is its main source of life-sustaining moisture. Termite food consists of cellulose obtained from wood and wood products. Decaying damp wood is preferred but termites are also able to feed on sound, dry lumber.
Foundation walls and slabs should be designed to inhibit the entry of termites into the building, and to facilitate inspection for shelter tubes. Sheet metal and steel mesh barriers properly designed and installed, are also an effective means of control. Wood products and other building materials should be selected with regard to termite resistance.
It is useful to know for termite identification that almost every type of termite lives in the dark, apart from the winged ones that fly or any termite when they are constructing something. This means that you normally only see them when something is open or broken. When they are exposed, termites attempt to follow their scent trails to get home. If they can`t get home, they either squeeze themselves into a small gap or wander around looking lost until they find another termite.
Often shelter tubesconstructed of soil particles cemented together by excrement or secretions from the mouth are used to connect the outside soil to a building and for crossing a concrete or metallic portion in a structure. The presence of a shelter tube is generally the first physical evidence of a termite infestation.
Termites often enter buildings through cracks and holes and expansion joints in foundations. Spaces around piping and wiring are also points of entry. These openings may be filled with either roofing-grade coal-tar pitch, sealers or similar commercial caulking products.
Reproductive termites are similar but have wings. Termites are weak flyers and will only attempt to fly if the air is still and there is high humidity without the likelihood of rain. The largest member of the termite family is the queen. She can be up to 4 inches long and lays up to 4 eggs a minute! If she dies, one of the reproductive termites takes her place.