Baiting involves placing bait tubes or traps in the ground at intervals around a building -several dozen for a typical house. Pieces of untreated timber or other cellulose-based material are inserted into these tubes as bait for termites. The tubes are monitored and, when termites are observed feeding on the bait, it is replaced with treated bait containing a chemical that the termites then carry back to the colony. The chemical is slow acting, so termites are unable to associate its source with its effects. Over a period of several months, the entire colony may be destroyed.
Soldier termites are similar in size and colour to workers, but have an enlarged brownish coloured head with large modified mandibles (large biting jaws), used for defense.
Break the wood-soil contact. To little clearance between the soil and wooden structures often results in all of the physical requirements for a termite infestation being met (moisture, decaying wood, and food readily available). A general rule is that there should be a 45cm (18 inch) clearance between the soil and lowest horizontal members of the structure. If wooden lattice-work is used around verandas, there should be a space of 50 - 75 cm (20-30 inches) between the soil and this lattice-work. Other problem areas include veranda and basement steps, where the wood is in direct contact with soil.
Improve the water drainage around your property. If the soil is constantly moist, optimum conditions are provided for the termites. Repair eaves trough, slope concrete walks away from the house and repair all leaks.
It is difficult to identify termites unless there is a reproductive swarm. Swarming termites do however resemble swarming ants. Some people call termites "white ants" but this is an incorrect term. Termites are often white but some are so clear you can see food in their gut. Their bodies are very soft.
A typical termite family will include soldiers. These have long heads and powerful jaws. Soldier termites defend the family unit. If you can find some soldier termites, this makes it easier to know whether you have a termite problem. Solders only make up part of the termite population so you will have to look carefully for them. Most termites are workers. These are about 2/5 inch long and are recognizable by their soft, light-colored bodies. They look a bit like moving grains of rice.
All three of these methods will help protect your home from termites. By making termite control a priority, you can sit back and enjoy your home instead of stressing over finding a contractor (and the money) to replace the framing and walls of your home. If a home in your neighborhood has a termite problem, contact a termite services company immediately for an inspection of your home. Don`t think destructive termite damage can`t happen to you.
Inspect your home regularly to prevent termite infestation. Monitor your home carefully and Keep a tab on the termite damages. As termites need water to survive ensure that there are no water leaks at your home whether outside or inside. Keep a check on the plumbing, replace old taps, and pay attention to drips and leaks.Use boric acid powder or solution to do away with the problem of termite.
When no further activity is observed in the bait stations, treated bait is removed, and replaced with untreated bait. Monitoring continues on a regular basis, and the procedure is repeated as necessary. Several companies offer products and services that are variations on this method of site treatment, although baiting is still a relatively new approach for termites.
Suppression refers to measures intended to reduce and eventually eradicate termites from infested materials in a designated area. Suppression methods include systematic location and destruction of colonies not associated with buildings (such as in street trees), systematic inspection of wood products leaving an infested area to quarantine the infestation, burning of infested lumber and heat treatment of reclaimed lumber.