Powder post beetles only do significant damage when multiple generations continually re-infest the same piece of wood. Also, powder post beetle damage is restricted to hardwoods, and since most structural framing is made of softwood lumber it is rarely attacked by these insects.
If you own a property made of wood then getting rid of termites is one of the top most priority. It is an important that most of the people faces, whether they own a house or not. Pest control takes advantages of this and thus at times charge unreasonable prices at times.
A typical termite family will include soldiers. These have long heads and powerful jaws. Soldier termites defend the family unit. If you can find some soldier termites, this makes it easier to know whether you have a termite problem. Solders only make up part of the termite population so you will have to look carefully for them. Most termites are workers. These are about 2/5 inch long and are recognizable by their soft, light-colored bodies. They look a bit like moving grains of rice.
Suppression refers to measures intended to reduce and eventually eradicate termites from infested materials in a designated area. Suppression methods include systematic location and destruction of colonies not associated with buildings (such as in street trees), systematic inspection of wood products leaving an infested area to quarantine the infestation, burning of infested lumber and heat treatment of reclaimed lumber.
Termites often enter buildings through cracks and holes and expansion joints in foundations. Spaces around piping and wiring are also points of entry. These openings may be filled with either roofing-grade coal-tar pitch, sealers or similar commercial caulking products.
Careful site preparation and clean-up can do much to discourage the colonisation of a new or existing building site by termites. Where forest or orchard land has been cleared, tree roots must be completely excavated and removed along with any other buried wood.
Several species of powder post beetles are to be found in the U.S. and Canada. They vary in length from 1/16" to 3/8", but generally have flattened bodies, a prominent head and segmented antennae. True powder post beetles attack only hardwoods (particularly oak, hickory, ash, walnut and cherry) but other species of wood boring beetles attack both hardwoods and softwoods.
In the termite colony there are generally several generations present. The colony is made up of several castes (forms) (larvae, nymphs, secondary and primary reproductives, soldiers and workers), who carry out specific duties or functions.
Foundation walls and slabs should be designed to inhibit the entry of termites into the building, and to facilitate inspection for shelter tubes. Sheet metal and steel mesh barriers properly designed and installed, are also an effective means of control. Wood products and other building materials should be selected with regard to termite resistance.
The third method of dispersal is through infested wood or soil being transported to a new location. As few as 15-40 larvae or nymphs contained in the infested material may moult to become secondary reproductives and begin a new colony.